Cisco Aironet 1240AG

From Help
Jump to: navigation, search

Model number: AIR-AP1240AG-A-K9 v01

Main Vendor Page: Installation Guide:


  • Disconnect power from the AP.
  • Disconnect the power jack for external power or the Ethernet cable for inline power.
  • Press and hold the MODE button while you reconnect power to the AP.
  • Hold the MODE button until the Status LED turns amber, and then release the button.
  • The Status LED turns amber in approximately 1 to 2 seconds.
  • After the AP reboots (this will take at least 30-60 seconds), reconfigure the AP and use the web browser interface, the Telnet interface, or Cisco IOS Software commands.
  • Note: The AP is configured with the factory default values that include:
    • The IP address, which is set to receive an IP address with DHCP
    • The default username and password, "Cisco"

Return to Main Page